Hunt Groups and Call Queues: How to Stop Business Calls Ringing Out

Three office staff at desks answer and reach for Cisco desk phones in a bright open-plan office.

The short answer

A hunt group rings your phones one after another until someone answers. A call queue holds callers in line instead. Small teams can start with a hunt group and add a queue once calls begin to stack up.

In short

A ring group rings every phone at once
A hunt group tries phones in a set order
A call queue holds callers with a message and music
Always set a fallback for unanswered calls
Test the setup by calling in at a busy time

Customers describe it the same way: the phones ring out, there is only one line, or the call drops into voicemail while everyone is flat out. For a small business, a call nobody answers can be a missed job. A hunt group is one of the simplest ways to fix that, and on many phone systems it is a routing setting rather than extra hardware.

This guide is for owners and office managers running 3 to 20 handsets. It explains ring groups, hunt groups and call queues in plain English, shows which one fits, and walks through two sample setups so you can stop calls ringing out on your own system.

If you want the dollars-and-cents case first, read what missed calls cost and come back here for the fix.

Why do business calls ring out?

Calls ring out when the system has nowhere else to send them. A call arrives, the phone rings, nobody can pick up, and the caller either hangs up or lands in a voicemail box that nobody checks until tomorrow.

The causes are rarely exotic. Everyone is already on a call, the front desk is empty at lunch, one handset does all the answering, or the team is out on site. Staff are not doing anything wrong. The phone system simply has no plan for the moment when the first person is busy.

Better routing fixes the question of where a call goes next. It will not create extra people, so it works best alongside sensible rosters and a deliberate fallback. That is the realistic way to stop missed calls: some calls will still go unanswered, but they go somewhere you chose, not into the void.

What is a hunt group?

A hunt group rings a list of phones in a set order until someone answers. The system tries the first person, then the second, then the third, working down the list. That is the “hunt”.

How is a hunt group different from a ring group?

A ring group rings every phone in the group at the same time, and the first person to pick up takes the call. A hunt group rings one phone at a time. The order lets you send calls to the right person first, for example the receptionist, then the office manager, then the owner.

What ringing patterns can a hunt group use?

Systems name these differently, so check the labels in yours. The usual patterns are “top down” (always start at the first person), “round robin” (start with whoever is next in turn, so the load is shared) and “longest idle” (start with the person who has been off the phone the longest).

The right pattern depends on how many phones you run. How many lines and handsets your business needs is worth settling before you build any group, because a hunt group is only as good as the people on its list.

What is a call queue?

A call queue holds callers in line, with a message and music, until someone is free. Instead of an engaged tone or endless ringing, the caller hears something like “Thanks for calling, you are next in line.”

Queues suit the moments when calls bunch up: the 9am rush, the Monday after a long weekend, the day a campaign goes out. You usually control the greeting, whether callers hear their position, and the longest wait before the call moves on.

A queue is only worth having if someone is available to answer from it. A queue with nobody logged in is just a slower route to voicemail, so decide who covers it, and when, before you switch it on.

Hunt group vs call queue: which one fits your business?

Use a hunt group when calls arrive one or two at a time. Use a call queue when callers regularly stack up. The table lines up all three options side by side.

Ring group Hunt group Call queue
How it rings Every phone at once One phone after another Holds callers, then rings the next free person
Best for Very small teams sharing a front desk A clear first, second and third person to answer Busy periods with more calls than people
Caller hears Ringing Ringing A message, music and sometimes their place in line
Watch out for Everyone assuming someone else will answer Long total ring time as the call works down the list Nobody logged in to take calls from the queue

For a 3 to 20 person business, the honest answer is often both: a hunt group for normal days and a queue for the peaks. Start with the simplest option that matches how your calls actually arrive, then add to it only when the data says you need to.

What happens when nobody answers?

Set a fallback so that no call rings forever. Pick a number of seconds, then send the call somewhere on purpose. This call overflow step does more to stop calls ringing out than any other setting.

Fallback options

01Overflow to a mobileAfter a set time, the call also rings a mobile. A phone system built around physical handsets, with the Webex app so the business number works on your mobile too, gives you a sensible place to send overflow when the desk is empty.
02Voicemail to emailThe caller leaves a message that lands in an inbox someone actually reads. Voicemail to email means nobody has to dial in to check a message bank.
03A second groupSend the call to another small group, such as the owner and the office manager, so it keeps moving down a chain you designed.
04An AI receptionistAn AI receptionist can answer overflow calls so callers are not left ringing. Treat it as cover for the gaps, not a replacement for your people.

Calls that arrive after closing need their own path. The after-hours routing guide covers that, so this post sticks to business hours.

Two sample setups: a 5-person office and a 12-person office

These are hypothetical examples to show the thinking. Change the numbers to suit your own business.

Five-person office

One hunt group on the main number. Reception rings first for about 15 seconds, then the office manager for 15 seconds, then the owner’s mobile for 15 seconds. The last stop is voicemail to email, so a message lands in an inbox.

Suits Teams where most calls arrive one at a time

Twelve-person office

A call queue on the main number with the front-of-house team logged in during business hours, a short “you are next in line” message and a two-minute limit. When the limit passes, the call goes to voicemail to email or an overflow number. A separate hunt group handles the direct line for the sales team.

Suits Teams with a busy stretch every day

Add up the times in your own plan. A call that walks through four steps of 15 seconds each rings for a full minute, and a caller may hang up before it reaches the end. If the total feels long, shorten each step or trim the list.

Settings to check before you go live

A few minutes of testing saves weeks of lost calls. Work through this list before you switch the new routing on, and again whenever staff join, leave or change hours.

Before you go live

✓Put the best-placed person first, not the most senior
✓Set a ring time for each person and add the total up
✓Choose what happens when the list runs out
✓Record a queue message that sounds like your business
✓Check who is logged in on Monday morning
✓Remove anyone on leave or off the roster
✓Call the main number from a mobile at a busy time
✓Write the setup on one page for whoever covers you

Frequently asked questions

What is the difference between a hunt group and a ring group?

Timing, mainly. A ring group rings every phone at once, while a hunt group tries them one after another in a set order.

Can a hunt group include mobiles?

Usually, yes. Many systems let you add a mobile number or an app user to the list, but a mobile outside your system may attract call charges, so check your plan.

Do I need a call queue for a small business?

Not always. If calls mostly arrive one at a time, a hunt group with a good fallback is enough. A queue earns its place when callers regularly stack up.

Will a hunt group stop every missed call?

No. It reduces them by sending calls somewhere deliberate, but no routing setup can promise that every call is answered. Staffing, ring times and fallbacks all matter.

How long should each person ring before the call moves on?

About 15 seconds. That is a sensible starting point, then adjust once you have seen how your own calls behave.

Set up routing that gets your calls answered

See how an AI receptionist can cover overflow and after-hours calls alongside your team.